H2D Pro Dynamic Tutorial
Our most powerful dryer at 2000W, dual voltage, under 400g, with ionic technology and a reverse cycle self-clean. Here is what each attachment is for and how to keep the airflow strong.
All Tutorials / Pro Dynamic
Watch the tutorials
Three magnetic attachments
What Each Attachment Does
The Pro Dynamic attachments are magnetic — they click on and pull off, with nothing to line up or twist. Let them cool before you swap them over.
Focuses the airflow into a narrow stream for section-by-section blow-drying. The one you will reach for most.
A wider, gentler airflow for the final pass. Smooths the top layer and calms flyaways without flattening the shape.
Disperses the airflow so curls and waves dry in their own shape. Cup a section, hold, then lift at the root.
Cleaning & care
Keeping The Airflow Strong
A dryer that feels like it has lost power almost always has a filter full of lint. The Pro Dynamic has a reverse cycle auto clean that pushes the build-up back out for you — the third video above walks through it.
- Leave it plugged in and switched on at the wallThe power needs to be on at the powerpoint for the clean cycle to run.
- Switch the dryer itself offUse the power switch on the dryer. The dryer is off, the wall is on.
- Hold the cool shot button until the cycle startsAbout five seconds. You will hear the airflow reverse.
- Let it runThe reverse airflow pushes trapped lint back out of the filter.
- Remove the filter cover and brush it cleanTake the cover off the base of the handle and brush away the lint and fluff.
- Click the cover back onSeat it properly before the next use.
Good to know
Before You Style
Still Have A Question?
The Pro Dynamic FAQ covers voltage, attachments and warranty. If your answer is not there, our team is one message away.
Read the FAQsAll TutorialsAsk Our Team